Home » Belts » Instructor Belt w/Velcro® Brand Closure

Instructor Belt w/Velcro® Brand Closure

$64.50

* Belt Color




Please make a selection

* Velcro Belt Size

Please make a selection

* Belt Width



Please make a selection

Accessories




? Add V Clip Pair


The V-Clip is intended for very deep concealment needs. This clip has no hook or ear and goes down behind the belt. It is faced with ""hook"" Velcro®and needs a Velcro®backed belt to attach to. This is a very stable clip and also completely invisible behind the belt, the downside is that you must attach some loop Velcro®to the back of a belt or buy a belt with some already on it. We do provide a length of loop Velcro®when you order this style clip, if you would like to use a belt you currently have. We also offer our own belts already equipped with the Velcro®kit which includes the Velcro®backed belt and V-Clips with hardware for use on our IWB holsters.

? Add J Hook Pair


The J-Hook clip goes down BEHIND the belt and then hooks up at the bottom preventing the holster from drawing out with the gun. The advantage to this clip is that it is more discreet than the SnapLok, but by putting the weight on the pants instead of the belt, it tends to want to ride down with heavier guns and is not as stable. The most common option is for folks to order a set of J-Hooks to go with their SnapLoks. We make this very easy by this being the default option and a pair of these is only $10.00 if ordered at the time you order your SuperTuck®. This means you would get both the SnapLoks and a pair of J-Hooks and decide which you liked best or mix and match.


In Stock


Overview & Specs

Instructor Belt w/Velcro® Brand Closure

The CrossBreed® Instructor Belt with Velcro Brand Closure has a buckleless design which boasts comfort, a sharp and professional appearance and the utmost stability and comfort. As with all belts by CrossBreed this belt is made utilizing American tanned Herman Oak top grain cowhide and lined with premium hard rolled leather with stitched cross grain creating a strong sturdy carry belt.  Each belt has recessed stitching and is hand buffed, burnished, and treated.  The belts will be approximately ¼” thick resulting in a strong belt with superior support for your carry needs, while still offering flexibility for comfortable every day wear.

The Instructor Belt with Velcro® Brand Closure has a Velcro® fastener instead of a hook and hole design with eight inches of adjustment for an exact fit.  There is no metal in its construction so this belt is ideal for persons working in Security or Corrections for ease of passing through security points. Belts are available in 1.25” and 1.5” widths. Other options include Basket Weave design and Velcro brand lining for use with our V-Clip package. Belts by CrossBreed® come with our “Two Week Try it Free Guarantee”.

Belt Sizing

The Velcro Instructor Belt by Crossbreed does not come with the standard 7 holes for adjustment that all of our other belts have. The Velcro belt allows for micro adjustment across the size range selected. Because there are no holes or buckle, the sizing for the Velcro belt are a bit different than the standard belts. You will still need to measure your current belt or waist as demonstrated on our belt sizing videos and instructions to determine your actual waist size. After you have your actual waist size, you will select the size range that is best fits your needs. The size you choose corresponds to the center of the hook Velcro and the center of the loop Velcro alignment. Each Velcro belt has 6” of hook Velcro on one end and 10” of loop Velcro at the other, this allows for a very broad range of adjustment. Our goal is for the Velcro to just overlap itself with no hook Velcro being exposed. Allowing you to increase or decrease the maximum adjust ability of the belt over time. Your Velcro belt will be stamped with a number that corresponds to the size range you selected when ordering. 

If you need assistance with belt options and sizing questions, kindly contact our customer service department at 888-732-5011.

Please Note: DO NOT use your pants size as your belt measurement or order a desired size from buckle to tip. This will give you an incorrect fit.

**SIZING ERRORS - We ask that our customers take the time to accurately measure for the correct fit before ordering a handcrafted belt. Our craftsmen take great care to ensure that your belt is correctly sized as ordered. All sizing error exchanges will be subject to a $10 processing and reshipping fee. Exchanges will be accepted during the two week trial period only.

**BELT ADJUSTMENT – After the two week free trial, there is a charge of $25.00 to have a belt cut down to a smaller size. The adjustment must be 4 inches or more for gun belts, instructor, and dress belts. Instructor belt with velcro® brand closure belts can be cut down in any increment.

**Lifetime warranty does not apply to Belts by CrossBreed®

Specs

Product Size: 7.50" x 1.25" x 8.25"
Product Weight: 9.3 ounces

Belt Sizing

To determine the correct size of CrossBreed® belt to order:

Measure, in inches, your EXISTING BELT from the end of the buckle to the hole that fits you the best. This measurement is your belt size.

All Belts by Crossbreed have seven holes for proper sizing. The size you order will be made for use with the center hole. If you know that you prefer a belt with a longer tongue, add 1-2 inches to your measurement. If you prefer a fit with a shorter tongue, subtract 1-2 inches from your measurement. For most people there is no need to change your belt size to allow for IWB carry of a single conceal carry pistol

If you need assistance with belt options and sizing questions, kindly contact our customer service department at 888-732-5011.

Please Note: DO NOT use your pants size as your belt measurement or order a desired size from buckle to tip. This will give you an incorrect fit.

**SIZING ERRORS
We ask that our customers take the time to accurately measure for the correct fit before ordering a handcrafted belt. Our craftsmen take great care to ensure that your belt is correctly sized as ordered. All sizing error exchanges will be subject to a $10 processing and reshipping fee. Exchanges will be accepted during the two week trial period only.

**BELT ADJUSTMENT
After the two week free trial, there is a charge of $25.00 to have a belt cut down to a smaller size. The adjustment must be 4 inches or more for gun belts, instructor, and dress belts. Instructor belt with velcro® brand closure belts can be cut down in any increment.

**Lifetime warranty does not apply to Belts by CrossBreed®

Videos