CrossBreed® Strives to offer some of the best warranty terms in the business. Please read the instructions below for information on your products available warranty.

All of our holsters except the following carry our lifetime warranty and two week trial period.

Ares Aegis Belt - No warranty, no trial period or returns

Modular Belly Band - The band itself is not under warranty, but the holster is covered under the lifetime warranty

Ankle Holsters - The ankle holsters do not carry the lifetime warranty.

Click Here to complete the Return Authorization form. Please complete the form and send a printed copy along with your package.
Although all of our leather hybrid holsters are treated with leather conditioner before they leave the shop, it may be necessary to condition the leather over the life of the holster. We use and recommend Neatsfoot Oil on our horsehide holsters and 4-Way leather conditioner on our cowhide holsters. The leather conditioners should be applied only to the gun side of the leather with a minimalist approach. The back side of the leather will be conditioned with the natural body oils from your skin and no further treatment is needed. If you need to clean the leather of your holster, saddle soap is recommended, followed by a leather conditioner after the leather has fully dried.
We have the ability to craft holsters for several different lasers on the market today including Crimson Trace, Laser Max and Laser Lyte and Viridian. Please check the gun listing on our website for your specific firearm and laser, if it is not listed we are unable to accommodate that particular model. If your firearm is fitted with a Crimson Trace Laser Grip, please include this information in the additional comment section of your order. At this time we are unable to accommodate any of the Universal Rail Mounted Lasers or Lights.
We offer three styles of clips for those holsters that have belt clips attached.

First is the standard clip which we call the SnapLok, this clip comes with all SuperTuck® holsters as the basic clip. It goes down over the outside of the belt and hooks the bottom edge of the belt via a 90 degree lip. It is a VERY stable clip as it puts the weight of the gun on the belt and not the pants. It offers the best support of all the clips and is reasonably discreet.

Next would be the J-Hook, this clip goes down BEHIND the belt and then hooks up at the bottom preventing the holster from drawing out with the gun. The advantage to this clip is that it is more discreet than the SnapLok, but by putting the weight on the pants instead of the belt, it tends to want to ride down with heavier guns and is not as stable. The most common option is for folks to order a set of J-Hooks to go with their SnapLoks. We make this very easy by this being the default option and a pair of these is only $10.00 if ordered at the time you order your SuperTuck®. This means you would get both the SnapLoks and a pair of J-Hooks and decide which you liked best or mix and match.

Finally we have the V-Clip which is intended for very deep concealment needs. This clip has no hook or ear and goes down behind the belt. It is faced with "hook" Velcro and needs a Velcro backed belt to attach to. This is a very stable clip and also completely invisible behind the belt, the downside is that you must attach some loop Velcro to the back of a belt or buy a belt with some already on it. We do provide a length of loop Velcro when you order this style clip, if you would like to use a belt you currently have. We also offer our own belts already equipped with the Velcro kit which includes the Velcro backed belt and V-Clips with hardware for use on our SuperTuck holster.
Making the best holster on the market means doing a lot of little things that other companies do not. To ensure top quality finished goods, we start with top quality components. We are proud to offer three different and distinct leather options, selected or tanned especially for CrossBreed® Holsters to suit each individual's needs and comfort.

Hand Dyed Cowhide Black
Our Hand dyed cowhide leather is tanned exclusively for Crossbreed® Holsters, the leather is leveled to 10 or 12oz thickness depending on application then a Nubuck finish is applied to the back of the leather. The hides are cut to the desired holster shape depending on what feel and thickness the holster and pistol application need. The cutouts are then hand dyed and beveled to ensure maximum comfort. The Black cowhide is sealed with leather conditioner to ensure a finish that will last a lifetime.

Premium Tan Cowhide
Our premium cowhide is tanned by Hermann Oak leather using their 100% natural chemical free process. These 11oz tooling sides are finished with a Nubuck backing resulting in our holsters having an unmatched quality and feel. Our OWB premium holster leather is skirting leather that we split one at a time to the correct thickness and feel needed for the individual holster. The piece is then beveled and a Nubuck finish is applied to the leather backing. Once in house, this leather is stamped and treated with Neatsfoot oil to keep the chemical free integrity. Our Premium cowhide is a great alternative to Horsehide for a tan option when Horsehide is not available..

Premium Horsehide
Our horsehides come from Horween leather, the only horse hide tannery in the United States. Horsehide is a very dense, tight grain leather that allows for a much thinner holster with the same stiffness and retention. Horsehide is from 7-9oz in thickness for IWB holster and over 9oz for the OWB holsters. Though horsehide is not moisture proof, it does hold up better to high moisture environments better than cowhide because of its dense grain quality. We recommend the horse to people living in very hot humid climates, the leather has a smooth feel and ability to wick the moisture away from your body make it a perfect choice for these conditions. The horse does take a bit longer to break in than the cowhide options due to its dense grain, but once that break-in period is over the horse will conform to the shape of your body and stay in that shape..

The supply of the proper high quality horsehide is limited, there are times when it is simply unavailable. During these times, the selection will be pulled from the website and made unavailable to order. If you'd like horsehide and it is currently unavailable, we suggest trying our Premium Hard Rolled Cowhide.
The Combat Cut is where we trim away some of the leather from behind part of the grip of your pistol, leaving leather coverage behind the trigger guard and slide. This allows a firmer grasp on the gun during the draw stroke. This modification will sacrifice a little bit of comfort but does increase the draw speed. This is an extra cost option because this cut is made to follow the contour of the individual firearm; the look of this cut varies from one holster to another depending on holster type, leather type, and gun choice. Approximately 20% of our customers prefer this option, while the others either have no preference or feel it sacrifices too much comfort. If you are unsure, don't order it. We can do it later if you would like; but once it's done, it's done.
While that is an individual question, here are some general guidelines. SuperTuck® - Overall the best choice and most popular model. It is adjustable and tuckable. It works well with all size guns and is intended for all day-every day carry. It works well from right at the hip all the way around to about 5:00 on the strong side. However, it is not the best choice for crossdraw or appendix IWB carry. The QwikClip is also tuckable and adjustable for cant but not for ride height. It has 3 settings which are FBI, Straight Drop and a bit of a reverse cant. It is the holster we recommend for crossdraw or appendix IWB carry. It also works well with smaller guns up to medium frame guns but can tend to have some stability issues with heavier guns such as full size steel frame guns.
Horsehide is a denser and tighter grained flesh than cowhide. This results in it being more moisture resistant. Customers in very humid climates or who tend to sweat heavily find this to be a useful option as horsehide tolerates dampness better. Horsehide is only available in natural as it's moisture resistance can also cause it to not take dye well. Additionally, the natural finish is very attractive on Horsehide. Horsehide is a limited option as it is not always available, during times when it is not available, the option will be removed from the selections. In other words, if you see it, you can order it.
Measure, in inches, your EXISTING BELT from the end of the buckle to the hole that fits you the best. This measurement is your belt size. The size you order will be made for use with the center hole. There is no need to change your belt size to allow for IWB carry.

If you need assistance with belt options and sizing questions, kindly contact our customer service department at 888-732-5011.

Please Note: DO NOT use your pants size as your belt measurement or order a desired size from buckle to tip. This will give you an incorrect fit.

**SIZING ERRORS - We ask that our customers take the time to accurately measure for the correct fit before ordering a handcrafted belt. Our craftsmen take great care to ensure that your belt is correctly sized as ordered. Exchanges will be accepted during the two week trial period only.

**Lifetime warranty does not apply to Belts by CrossBreed®
It is important that all surfaces be thoroughly cleaned before applying VELCRO® brand velcro with adhesives. All cleaning agents should be tested prior to use to ensure the cleaning agent will not have adverse effects on the item you are applying the VELCRO to. In most circumstances, isopropyl alcohol(rubbing alcohol) will be a sufficient cleaning agent.


We proudly offer LEO's, Military and NRA members a 10% discount.

Discounts may not be "stacked", no double dipping.

NRA members must be current members.

LEO's and Military may be active, retired or reserve.

To redeem the 10% discount, you need to type your code in the coupon box when you check out. Whether it's on the phone or in the shopping cart, the discount must be redeemed at the time of the order.

As of 09/01/09 we will not go back and do discounts retro-actively.It is the customer's responsibility to redeem it correctly.

NRA members, your code is "NRA" and you must give your membership number in the additional instructions box when you checkout or over the phone if calling the order in.

LEO's, your code is "LEO" and you need to state the department/municipality/agency that employs you in the additional instructions box or mention it on the phone.

Military your code is "MIL", you need to provide branch of service, and current station. Same thing, mention it in the additional instructions box or over the phone.

To clarify, type your respective code in the coupon box and the rest of your info in the additional instructions box when you check out.

Please let us know if you have any questions prior to placing your order.
Once you receive your holster you have two weeks to try it out, if it doesn't work for you, simply give us a ring and we will buy it back, less shipping and handling. Even after your two-week-try-it-free period is over, the holster still carries a lifetime warranty and we will repair or replace it as long as you own it if it fails you in any way under normal use. *Lifetime warranty does not apply to Ankle Holsters by Crossbreed® *Lifetime warranty does not apply to Belts by CrossBreed® - See detailed information below. **TWO WEEK FREE TRIAL – If you are not completely satisfied with your belt, you can return it for a full refund (less shipping and handling) within two weeks of receiving your order. **SIZING ERRORS - If a sizing error occurs you can exchange the belt within your two week free trial period for the correct size. **BELT ADJUSTMENT – After the two week free trial, there is a charge of $25.00 to have a belt cut down to a smaller size. “The adjustment has to be 4 inches or more”
Yes, absolutely. Your payment information is always safe. Our Secure Sockets Layer (SSL) software is the industry standard and among the best software available today for secure commerce transactions. It encrypts all of your payment information, including credit card number, so that it cannot be read over the internet.
We respect and are committed to protecting your privacy. We may collect personally identifiable information when you visit our site. We also automatically receive and record information on our server logs from your browser including your IP address, cookie information and the page(s) you visited. This is for our use only and we will not sell your personally identifiable information to anyone.


International shipping is available on any order.

All orders delivered outside the USA (including Canada and Mexico) are shipped using USPS Express Mail Service ONLY. International shipping cost is standard rate and non-negotiable. Cost is determined by your order size: $45.00 for the first item, $3.00 for each additional item ordered.

All products on this web site are sold and priced in US dollars. Items being shipped outside the United States could be subject to import duties, taxes, and tariffs as imposed by the country the product is being imported into. The customer (the person importing the product) is responsible for paying any import duties or taxes incurred by customs when the product reaches the country of destination. CrossBreed® Holsters is not responsible for any duties, taxes, or tariffs incurred by the importation of products into countries other than the United States. It is the responsibility of the recipient to be familiar with the customs rules and regulations of their country; CrossBreed® Holsters will not replace items seized by customs officials.

CrossBreed® Holsters is also required, by law, to declare full value (purchase price) of the product on any waybills or customs documentation. We cannot declare a lower value on your package than the purchase price that you paid. Thank you for your understanding.

If you have questions or need help with international shipping, please contact customer service: or 888-732-5011
We ship all packages via United States Postal Service. Once your package ships, you will receive e-mail notification along with USPS tracking information. To see more about the process from start to finish and current shipping time please click this link:
S&H charges are $8.95 for the first item and $3.00 for each additional item. S&H is not refundable.
The Expedite Craftsmanship program includes crafting your holster and shipping it USPS Priority Mail within 48 hours of receiving the order for an additional fee. Expedite orders placed Friday through Sunday will be made and shipped on the following Monday. The expedite selection is not available for belt purchases. The Expedite Craftsman option is available under your shipping options at checkout.

Products purchased through Authorized Dealers

Products purchased at a CrossBreed® Holsters authorized dealer will carry the same warranty as those purchased directly from CrossBreed® Holsters as it applies to any type of repair or replacement due to manufacturers defect.

If the product is defective please contact our customer service department at 888-732-5011 or complete the Return Authorization form at the bottom of this page and send your product to the address on the form.

Returns: Products that need to be returned that were purchased at a CrossBreed® Holsters authorized dealer will need to be returned to that dealer and according to their individual company policies.
Products that need to be returned that were purchased at a CrossBreed® Holsters authorized dealer will need to be returned to that dealer and according to their individual company policies.

Click here to complete the Return Authorization form. Please complete the form and send a printed copy along with your package.